The subsequent insert was the lesser H600 WXCU 05T3..., constructed for tools in the diameter range of 25 to 52mm. Now Iscar is announcing the H600 WXCU 0403.... This is an even tinier insert, which enlarges the tool diameter range to include 16 and 20 mm diameter sizes. The Helido-Upfeed high feed milling tools line now incorporates the complete diameter range of 16 to 125mm. All H600 WXCU 04, 05 and 08 inserts are peripherally ground. The completely new FF EWX...-04 indexable endmills are obtainable in 16 and 20 mm diameters with cylindrical, Weldon, Multi-Master and Flexfit shank types and numerous shank lengths. The tools have a 17 degree lead angle design, so the aftereffect cutting forces are guided axially against the spindle of a machine tool. This design provides greater stability and enables machining at extremely high feeds, even for long overhang functions. In addition, the the latest H600 WXCU 0403... insert is clamped into a dovetail pocket which furnishes very firm clamping. The new insert size is obtainable in Sumo Tec grades and an assortment of rake angles, to be applied on a wide range of materials and applications. All of the Helido-Upfeed cutters have coolant holes. This is extremely important when exercised to high feed milling, ramping, plunging and helical interpolation applications and provides outstanding performance and tool life. The groundbreaking tools and inserts offer an exemplary solution for die and mold production for machining cramped cavities.

S845 F45SX.. - R16 A New Breed of Tools for 45 degree Face Milling
Iscar is introducing a new family of tools for 45 degree milling. The revolutionary Helido square S845 SXMU 1606 ADTR-MM insert has eight helical right-hand cutting edges, providing a exceptionally economical answer. It is extraordinarily thick and strong and has a wiper which leaves an remarkable surface finish. The insert is clamped by a effective M5 screw into an inclined dovetail pocket which presents a very rigid clamping. Due to the most high-level production technology, excellent grade combination, unique chip deflector and positive cutting angles, the the latest generation features high durability, low cutting forces and remarkable tool life. The revolutionary insert can be used for machining steel, stainless steel and cast iron at very high machining speeds. The tools are presented in a diameter range of 40-250mm. They can machine 45 degree slanted shoulders up to 7mm depth. Customers of tools carrying SEKT or SEKN single-ended, positive inserts will realize the new S845 F45SX..-R16 tools more attractive, regarding price per corner and production. The Helido indexable endmill family combines the utmost advantageous features of both the Helimill and the Mill2000, which are the most suitable for heavy milling applications.

OFMW 0706R10-FF A Combination for Fast and Economical Face Milling
Iscar is introducing a innovative insert, increasing both the Heliocto and Feedmill indexable endmill families. The OFMW 0706R10-FF insert has eight Feedmill significant radii segmented cutting edges. The OFMW 0706R10 insert does not need any new tools. It can be clamped on the standard Heliocto HOF tools after eliminating their seats. The revolutionary insert is an extra option for the Heliocto milling cutters which already use the octagonal OF .. 0706/07T3 and the round RF.. 19.. inserts. The HOF cutters, when employed with OFMW 0706R10-FF inserts at small depths of cut, can run at very high table feeds. At 1/2mm DOC, a 3mm feed per tooth can be utilized. The tool life under the above-mentioned cutting parameters is exceptionally high. As with the other Feedmill tools, the circumstantial force exerted on the tool is aimed axially towards the spindle. This feature facilitates using the tools for extraordinarily high metal removal rates.

Some Of Improvements In Carbide Inserts By Iscar From Over The Years
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Iscar Recently Releases Many Brand New Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

The Most Recent In Carbide Endmill Architectures In A Long And Outstanding Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Adds Their Most Recent Innovations To A Lengthy Line Of Outstanding Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

A Selection Of Developments In Carbide Inserts Provided By Iscar Over The Past Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Choosing An Auto Engineering Job Today.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.

Absolutely New Car Manufacturing Jobs To Help Save The Economic State
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.